How much does it cost to refinish a gym floor?

The average price for gym floor refinishing is between $2.00 and $3.00 per square foot, depending on the cost factors listed below. This normally includes the following items: gym floor sanding and refinishing, materials, labor, logos, graphics and game line painting.

How often do gym floors need to be refinished?

1. How often should you sand & refinish a gymnasium floor? A gymnasium floor should be sanded and refinished every 10 years, however, this is simply a guideline. If there is chipping or flaking of finish, it might be time for a sanding.

How long does it take to refinish a gym floor?

If you’re working with an experienced professional flooring contractor, the entire project can be completed over a short school break, taking no more than two weeks. Your contractor will need roughly a week to sand, paint, and apply finish to your hardwood gym floor.

How do you resurface a gym floor?

Gym Floor Sanding and Refinishing

  1. The floor is refinished with a specialized sanding machine. …
  2. Two coats of MFMA-approved seal are applied to the floor (it is screened between each coat);
  3. Game lines, logos, and images are painted on the sealed surface;
  4. Once the paint is dry, the floor is tacked with a rag once again;
THIS IS IMPORTANT:  Why do my abs hurt after chin ups?

How much does it cost to refinish 1000 square feet of hardwood floors?

Cost per square foot to refinish hardwood floors:

Flooring square footage Average cost
100 – 250 sq. ft. $600
251 – 500 sq. ft. $750
501 – 750 sq. ft. $1,601
751 – 1000 sq. ft. $2,100

How much does it cost to redo a basketball court floor?

The expense of epoxy floor coating depends on the type of epoxy and square footage. You can expect to pay about $2,000 to $3,000 total for a small space, or approximately $6 per square foot for materials and professional installation.

Can you paint a gym floor?

Painting sport lines on a gym floor is something you’ll have to do if you want to work in the sports floor refinishing and installing arena. … Properly tacking the entire floor will help to ensure the best possible adhesion when it comes time to paint, stain, and finish the floor.

Is it cheaper to refinish or replace hardwood floors?

In general, it will almost ALWAYS be less expensive to refinish your hardwood floors. If you replace them, you need to pay for additional wood as well as ripping up and hauling away existing hardwood. … Even if you have this, it will still be less expensive then replacing the whole floor.

What are gym floors finished with?

Oil-based gym floor finish

Traditional appeal — This type of finish will give you a traditional appearance because it’s been used on so many floors for so many years. As of right now, the simple fact is that oil-based polyurethane finishes are the industry standard, especially when it comes to gym floors.

THIS IS IMPORTANT:  Do I have good genetics for building muscle?

How much does a floor sander cost?

Floor sander prices vary a bit from place to place, but you can expect to pay around $60 per day. However, it’s easy to ruin a floor without the right experience or training. If you must DIY, consider hiring out for this step. Commercial drum floor sanders cost $50–$80 per day.

How do you paint a rubber gym floor?

Paint Options

For light-duty use, 100 percent acrylic exterior house paint will adhere well and remain flexible enough to remain intact. Because the oils in rubber will probably bleed through water-based paint, use a fast drying oil- or shellac-based primer for the first coat.

Can you refinish floors yourself?

If you only have some minor scratches and dings or a dull finish, you might be able to simply buff and add a new coat of varnish. But, even if your floors need a complete makeover, refinishing hardwood is a very manageable and rewarding do-it-yourself job that can save a lot of money.

Can you stay in house while floors are refinished?

Area rugs are to stay off for SEVERAL months (many refinishers will tell you to leave the rugs off the floor for 6 months or more). As you can see, all of this adds up to the decision to leave the home (overnight stays) during work and while the floor is curing/off-gassing.

How long do you have to stay off hardwood floors after refinishing?

How long do I have to wait to use my room after my floors are refinished? We recommend waiting 6 hours before walking on your new floors in socks. After 24 hours you can walk through with shoes on. Allow 48 hours before setting furniture and returning pets.

THIS IS IMPORTANT:  How do I start CrossFit at home?